11th Gen Civic Forum banner
1 - 6 of 6 Posts

Bigboivtec21

· Registered
Joined
·
2 Posts
Discussion starter · #1 ·
Can anyone tell me the size of the cat check bolt washer I’m not talking about the 3/8 drain plug I already know it’s an 18mm but in order to make sure the level is right you gotta take off this bolt and if fluid comes out than you’re right on level I need to know the size of the washer on that check bolt if any one knows please let me know even a part number would be good thank you!!!!!
 
Can anyone tell me the size of the cat check bolt washer I’m not talking about the 3/8 drain plug I already know it’s an 18mm but in order to make sure the level is right you gotta take off this bolt and if fluid comes out than you’re right on level I need to know the size of the washer on that check bolt if any one knows please let me know even a part number would be good thank you!!!!!
It should be 20mm, I just bought a bunch and I remember ordering a bunch of 18mm and 20mm washers

Heres the dreamshop part numbers:

Image
 
Discussion starter · #3 ·
The 20 mm is too big bro because the last time I took off the check bolt to make sure the cat level was at level the washer on the bolt was small as hell like a 10mm or 12mm but because I don’t have the crush washer I just reused the old one and never got any leaks
 
The 20 mm is too big bro because the last time I took off the check bolt to make sure the cat level was at level the washer on the bolt was small as hell like a 10mm or 12mm but because I don’t have the crush washer I just reused the old one and never got any leaks
im not sure then, can you identify it on this diagram? The 2.0L one is very obvious in comparison (its 34 in this picture)

Image


versus the 1.5T

Image
 
1 - 6 of 6 Posts